Go Bottom

---

B2100 HSD question

daveh Join Date: Posts: 1

2000-11-01          21105

I went brain dead for a few minutes changing the hydro oil on my B2100 HSD. The question is, there's a 17mm capscrew smack dap in the lower middle on the front of the rear transmission case, right where a steel hydro line comes from the filter. Hmmm, same size as the drain plugs, hence here's where the brain dead comes into play. Inside there is (was) a spring and a cone shaped piece, I'm assuming a pressure relief. Anyway, it came out and I'm wondering and checking if I put it back in the correct way.I put it in cone first, taper inwards to the case, then the spring into the recess on the capscrew. Won't even use the excuse that I was scampering from under the 'bota and changing the oil on the jeep, and having to chase the puppy thru the woods. And yes, the shop manual was ordered last weekend. Thanks

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !